ISBLE1810-x51

2016 年 06 月 12 日

 

Overview

The ISBLE1810-x51 Series from iSenseTek is a powerful, highly flexible Bluetooth Smart module based on the nRF51822 SoC from Nordic Semiconductor. With an ARM® CortexTM M0 CPU, embedded 2.4GHz transceiver, and on-module chip antenna. The ISBLE1810-x51 module is the smallest Bluetooth Low Energy (BLE) module in the market, the size is only 18mm*10mm include PCB antenna, it provides a complete RF solution with no additional RF design, allowing faster time to market. The ISBLE1810-x51 provides full use of the nRF51822’s on-chip peripherals, allowing for a wide range of applications without the need for an external host microcontroller; simplifying designs and reducing BOM costs.

Datasheet:

ISBLE1810-x51: Datasheet-1810 Wireless Module (nRF51822)_V12-20170324.pdf

 

   1.  Key Features

  • Based on the Nordic nRF51822 SoC
  • Complete RF solution with integrated chip 
antenna
  • ARM® CortexTM-M0 32-bit processor.
  • Serial Wire Debug (SWD)
  • Over-the-Air (OTA) firmware updates
  • Multiple protocol of BLE & RF 2.4GHz & ANT+ upon customer preference
  • Low power requirements, Ultra-low peak, Average and idle mode power Consumption
  • Compatible with a large installed based of mobiles phones, tablets and computers
  • Fully coverage of wireless applications
  • BLE & RF transmission switching may help products to fit all operation system
  • BLE & RF transmission switching may help products to fit all kinds of hardwares
  • One 32-bit and two 16-bit timers with counter mode
  • AES HW encryption
  • Real Timer Counter (RTC)
  • 8/9/10 bit ADC – 8 configurable channels
  • CPU independent Programmable Peripheral Interconnect (PPI)
Quadrature Decoder (QDEC)
  • Dimensions: 18x10x1.95mm

    2. Quick Specifications

  • Supply voltage : 1.8 V to 3.6 V
  • TX Power : +4 dBm @16mA , 0 dBm @10.5mA
  • RX Sensitivity : -93 dBm sensitivity in Bluetooth® low energy mode
  • Pins : 32 GPIO (8 analog inputs)
  • Interfaces : UART / I2C / SPI / PWM / PDM / I2S
  • Memory : 256 kB embedded flash program memory; 16 kB or 32 kB RAM
  • Operating Temp :
    Industrial : -40 ~ +85°C
    Extended : -40 ~ +105°C
    Commerce : -20 ~ +75°C
    Automotive : -40 ~ +85°C

    3. Applications

  • HID
  • Appcessories
  • iBeaconsTM
  • Low-Power Sensors
  • Connected Appliances
  • Lighting Products
  • Fitness devices
  • Wearables

    4. Ordering Information

Email support@isensetek.com for quotes and ordering or visit

http://www.isensetek.com/wordpress/product/blemodule/isble1810-x51/

     5. Comparision Table

Part Number Description
ISBLE1810-P51822AC-A ISBLE1506 module included chip antenna, 256kFlash, 16kBRAM, Rev A
ISBLE1810-P51422AC-A ISBLE1506 module included chip antenna, 256kFlash, 16kBRAM, Rev A, support ANT+ protocol.
ISBLE1810-A51822CC-A ISBLE1506 module included chip antenna, 256kFlash, 32kBRAM, Rev A
ISBLE1810-A51422CC-A ISBLE1506 module included chip antenna, 256kFlash, 32kBRAM, Rev A, support ANT+ protocol.
ISBLE1810-DK-P51 ISBLE1810 development kit included ISBLE1810-P51822 module, the kit compatible with the Arduino.